Spa Chemicals – Page 3

Spacare Spa Sanitiser 5kg

SKU: LC-SS5

Directions for use:
DO NOT use this product in indoor pools or commercial spa installations.
Dosage rate:
6 grams for every 1000L of water
60 grams for every 10,000L of water
Minimum free chlorine level:
Cold Water - 2mg/L
Water temp greater than 26degC - 3mg/L

Spacare Spa Silk 1kg

SKU: LC-SILK1

Directions for use:
Initial application of 200g per 1000 litres of water with filter running
Dosage rate:
30g for every 1000 litres of water
Frequency:
Weekly

Spacare System Klenz 500mL

SKU: LC-SK500

Directions for use:
Refer to directions on container
Dosage rate:
250ml for every 1000 litres of water
Frequency:
Quarterly

Spacare Therapy 3 for Spas

SKU: LC-65TH500M

Directions for use:
Check the water balance is within range
Pour around the perimeter of the spa with the pump running
Run the pump for one cycle
Dosage rate:
50ml for every 1000L of water
Frequency:
Weekly

Spacraft 125g Cartridge Filter Cleaner

SKU: CH-CFC125

Dosage:
125g per 25 Litres.

Application:
Submerge the cartridge in to diluted solution. (Allow to soak for 24hrs for best results)
Rinse thoroughly before refitting cartridge.

*Dosage rates and application only a guide

Spacraft 1kg Alkalinity & pH Increaser

SKU: CH-INC1

Dosage:
18g per 1000 Litres.

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Alkalinity & pH Decreaser

SKU: CH-RED500

Dosage:
Refer to table on bottle

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Alkalinity & pH Increaser

SKU: CH-INC500

Dosage:
18g per 1000 Litres.

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Cartridge Filter Cleaner

SKU: CH-CFC500

Dosage:
125g per 25 Litres.

Application:
Submerge the cartridge in to diluted solution. (Allow to soak for 24hrs for best results)
Rinse thoroughly before refitting cartridge.

*Dosage rates and application only a guide

Spacraft 500g pH Increaser

SKU: CH-PHUP500

Dosage:
Refer to table on bottle

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500ml Spa Clarifier

SKU: CH-SCL500

Dosage:
40ml per 1000L

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.

*Dosage rates and application only a guide

Spacraft 500ml Spa Pipe Cleaner

SKU: CH-SPC500

Dosage:
50ml per 1000L

Application:
Remove filter cartridge and fill spa to 50mm above jets.
Turn on pumps and blowers and add required dosage, running system for 1 hour.
Turn off for 1 hour then run for a further 30 mins.
Drain spa, refill with fresh water and sanitise.

*Dosage rates and application only a guide