Spa Chemicals – SpaCraft

LoChlor Therapy 3 – 5L

SKU: LC-65TH5L

Directions for use:
Check the water balance is within range
Pour around the perimeter of the spa with the pump running
Run the pump for one cycle
Dosage rate:
50ml for every 1000L of water
Frequency:
Weekly

Magnor Bromine Dispenser

SKU: MA-TD3

Magnor Floating Bromine Dispenser Floating bromine dispenser designed for hot tubs, allowing controlled chemical release via an adjustable flow collar. Adjustable flow controlThreaded cap designFits standard pool poles

Spa-Craft Spacare Chemical Kit Bucket

SKU: LC-SPAKITL

Directions for use
Follow dosage instructions on product labels.
A dosage chart is also provided within the kit. Indicated dosages are intended only as a guide.

Spa-Craft Spacare Chemical Kit Carton

SKU: LC-SPAKITS

Directions for use
Follow dosage instructions on product labels.
A dosage chart is also provided within the kit. Indicated dosages are intended only as a guide.

Spacare Alkalinity & pH Increaser 500g

SKU: LC-INC500

Total Alkalinity & Instructions for dosage:
Add 18gm of Alkalinity & pH Increaser per 1000 litres of water to increase Total Alkalinity by 10 parts per million (ppm)

Directions for use:
1. Calculate the required amount of Alkalinity & pH Increaser (see dosage above)
2. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
3. Run filter for at least 1 hour.
4. Allow 3-4 hours before re-testing the Alkalinity.

pH Instructions & Directions for use:
1. have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.

IMPORTANT NOTES:
If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advise before adding Alkalinity & pH Increaser as metal staining may occur.

Spacare Bio Klenz 500mL

SKU: LC-BK500

Dosage:
Add 250ml of Bio-Klenz per 1000 litres of water

Frequency:
Monthly

Instructions for use:
Ensure sanitiser is present during treatment.
Check that both pH and Total Alkalinity levels are within correct parameters.
Add required amount of Bio-Klenz.
Run pump to circulate.

Spacare Bromine Tablets 1kg

SKU: LC-CC.SBT.1K

Dosage:
1 tablet per 1,000 litres (maintain)
6 tablets per 1,000 litres (shock treatment)
Dosage rate are only a guide

Spacare Calcium Hardness Enhancer 500g

SKU: LC-CE500

Directions for use:
Dissolve required amount of Calcium Hardness Enhancer in a bucket of water, then add to the spa water.

Dosage:
Add 10g per 1000 litres of water to increase calcium hardness by 10ppm

Inportant Note:
Never add Calcium Hardness Enhancer via the skimmer. The product liberates heat as it dissolves and can damage the skimmer basket and housing.

Spacare Crystal Clear(Clarifier) 1Lt

SKU: LC-CC1

Dosage:
Add 100ml per 1000 litres of water every fortnight.

Directions:
Ensure that your spa/hot tub water is correctly balanced.
Clean the filter(s) prior to using Spa Care Instant Filter Klenz for cartridge filters.
Add the required amount of Crystal Clear to the spa/hot tub (see dose rate above).
Run the circulation pump for a minimum of 1 hour.

Repeat the dosage on a fortnightly basis and when refilling the hot tub/spa.

NOTE:
When there is a heavy bather load, an extra dose is advised as there will be additional body fats in the water which could cause cloudiness and foaming.

Spacare Crystal Clear(Clarifier) 500mL

SKU: LC-CC500

Dosage:
Add 100ml per 1000 litres of water every fortnight.

Repeat the dosage on a fortnightly basis and when refilling the hot tub/spa.

NOTE:
When there is a heavy bather load, an extra dose is advised as there will be additional body fats in the water which could cause cloudiness and foaming.

Spacare Instant Filter Klenz 500mL

SKU: LC-IFK500

Directions for use:
1. Wear protective gloves and use outdoors/well ventilated area. Avoid use on windy days.
2. Remove filter/s from the filter compartment.
3. Rinse the filter/s with fresh water, a hose pipe is ideal to remove loose pollution from the filter.
4. Turn the nozzle on the trigger spray applicator from the STOP to SPRAY position.
5. Thoroughly spray the filter with Instant Filter Klenz taking care to penetrate the filter veins with product.
6. After use turn the nozzle of the spray applicator from SPRAY to STOP and store the bottle safely.
7. Leave the filter/s to stand for a minimum 15 minutes.
8. Rinse the filter/s thoroughly with fresh water from a hose pipe - at this stage foaming may occur.
Continue rinsing until foaming stops.
9. Heavily soiled filters may require a second application.
10. Once the filters have been thoroughly cleaned and flushed, they can be returned to the filter compartment of your spa or hot tub.

Spacare Leak Sealer 500ml

SKU: LC-LS500

Application:
1. Remove all cartridge filters, or for sand filters select the BYPASS option (if applicable) prior to dosing the product.
2. With the pump running add the required dose of Leak Seal slowly through the skimmer or in front of any other suction intake.
3 Leak Sealer is very heavy and will sink to the deepest point, which in most cases will be below the bottom drain, therefore the product must be stirred back into suspension every 45 minutes, whilst the water circulates.
4. Leave the water circulating for a minimum of 3 hours after which time check to see if the leak has stopped (if visible) and/or check the water level. if the leak has slowed down continue to run the circulation system for another 3 hours.
5. When the leak has stopped turn off the pump and let any residue settle to the bottom of the spa. This can then be removed with a suitable spa vacuum.
6. Replace the cartridge filters and let the system circulate for 45 minutes, after which time remove the cartridges and thoroughly clean with fresh water to remove any product residue from the filter veins.
7. After the leak has stopped, it is recommended that the spa/hot tub is fully drained and left empty for a minimum of 48 hours to allow the product to cure.

PLEASE NOTE:
The leak may be slowed down after one application, if this is the case we recommend a second application.

Dosage:
Add 120ml of Leak Sealer per 1000 litres of water.