Directions for use:
Check the water balance is within range
Pour around the perimeter of the spa with the pump running
Run the pump for one cycle
Dosage rate:
50ml for every 1000L of water
Frequency:
Weekly
Dosage:
500ML treats 60,000Litres pool water
Did you know?
By adding a dose of Winteriser Algaecide
You need only chlorinate your pool once every 10 - 14 days?
You need only run your filter for a minimum of 2 hours a day?
Your salt chlorinator runs more efficiently?
You are cutting electricity costs during winter saving your customer money and helping the environment by lowering carbon emissions
Dosage:
500ML treats 60,000Litres pool water
Did you know?
By adding a dose of Winteriser Algaecide
You need only chlorinate your pool once every 10 - 14 days?
You need only run your filter for a minimum of 2 hours a day?
Your salt chlorinator runs more efficiently?
You are cutting electricity costs during winter saving your customer money and helping the environment by lowering carbon emissions
Dosage:
200g per 10,000 Litres.Â
Will increase Alkalinity 10PPM
Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface
*Dosage rates and application only a guide
Dosage:
Refer to table on bag.
Application:
Pour all bag/s into the pool and allow to dissolve. Run filtration system for 12 hours to allow complete dilution.Â
*Dosage rates and application only a guide
Â
Dosage:
1 Tablet per 50,000 Litres
Application:
Place the required number of tablets into the skimmer basket and run the filtration for 24-48 hours.
Backwash if necessary.
*Dosage rates and application only a guide
Â
Dosage:
100g per 10,000 Litres.
Will increase cyanurate level 10PPM(mg/L)
Application:
Add required amount of product directly into the skimmer basket with the pump running
*Dosage rates and application only a guide
Dosage:
250ml per 30,000 Litres.
Application:
Measure the correct quantity and mix in a bucket with pool water, distribute around the pool and continue running the filtration system for min 8 hours.Â
Vacuum if necessary.
*Dosage rates and application only a guide
Â
Dosage:
200ml per 10,000 Litres.
Application:
Measure the correct quantity and mix in a bucket with pool water, distribute around the pool and continue running the filtration system for 1-2 hours.Â
Turn off filtration system and leave pool for 12-24 hours until residue settles.Â
Vacuum to waste, resume normal filtration
*Dosage rates and application only a guide
Great savings on selected products, check-in often for updated lists.

Once submitted, your pool/spa details will be entered into our sizing calculator along with your local weather details provided by the “Bureau of Meteorology”. A personalise evaluation will be emailed to you within 1-2 business days by a Sensaheat product specialist.