No products in the cart.
24-48 Hr Dispatch
Fast Delivery Australia Wide
Part Identification
On Site Over the Phone Help
Trade Registration
Sensapool 2kg Stabiliser(Sunscreen)
SKU: CH-PS02KDosage:
100g per 10,000 Litres.
Will increase cyanurate level 10PPM(mg/L)
Application:
Add required amount of product directly into the skimmer basket with the pump running
*Dosage rates and application only a guide
Sensapool 3kg pH Reducer(Dry Acid)
SKU: CH-DA03KDosage:
150g per 10,000 Litres.
Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface
*Dosage rates and application only a guide
Sensapool 4kg Alkalinity Increaser(pH Buffer)
SKU: CH-BU04KDosage:
200g per 10,000 Litres.Â
Will increase Alkalinity 10PPM
Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface
*Dosage rates and application only a guide
Sensapool 4kg Calcium Increaser(Hardness Increaser)
SKU: CH-CI04KDosage:
100g per 10,000 Litres.
Will increase Calcium Hardness 10PPM (mg/L)
Application:
Dissolve the required amount in a bucket of pool water, stirring well. Dispense the solution gradually into the pool, away from the skimmer box. For optimal results, apply the required amount in thirds, while running the filtration system for up to six hours.
*Dosage rates and application only a guide
Sensapool 5kg pH Reducer(Dry Acid)
SKU: CH-DA05KDosage:
150g per 10,000 Litres.
Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface
*Dosage rates and application only a guide
Spa-Craft Spacare Chemical Kit Bucket
SKU: LC-SPAKITLDirections for use
Follow dosage instructions on product labels.
A dosage chart is also provided within the kit. Indicated dosages are intended only as a guide.
Spa-Craft Spacare Chemical Kit Carton
SKU: LC-SPAKITSDirections for use
Follow dosage instructions on product labels.
A dosage chart is also provided within the kit. Indicated dosages are intended only as a guide.
Spacare Alkalinity & pH Increaser 500g
SKU: LC-INC500Total Alkalinity & Instructions for dosage:
Add 18gm of Alkalinity & pH Increaser per 1000 litres of water to increase Total Alkalinity by 10 parts per million (ppm)
Directions for use:
1. Calculate the required amount of Alkalinity & pH Increaser (see dosage above)
2. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
3. Run filter for at least 1 hour.
4. Allow 3-4 hours before re-testing the Alkalinity.
pH Instructions & Directions for use:
1. have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.
IMPORTANT NOTES:
If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advise before adding Alkalinity & pH Increaser as metal staining may occur.
Spacare Bio Klenz 500mL
SKU: LC-BK500Dosage:
Add 250ml of Bio-Klenz per 1000 litres of water
Frequency:
Monthly
Instructions for use:
Ensure sanitiser is present during treatment.
Check that both pH and Total Alkalinity levels are within correct parameters.
Add required amount of Bio-Klenz.
Run pump to circulate.
Spacare Bromine Tablets 1kg
SKU: LC-CC.SBT.1KDosage:
1 tablet per 1,000 litres (maintain)
6 tablets per 1,000 litres (shock treatment)
Dosage rate are only a guide
Spacare Calcium Hardness Enhancer 500g
SKU: LC-CE500Directions for use:
Dissolve required amount of Calcium Hardness Enhancer in a bucket of water, then add to the spa water.
Dosage:
Add 10g per 1000 litres of water to increase calcium hardness by 10ppm
Inportant Note:
Never add Calcium Hardness Enhancer via the skimmer. The product liberates heat as it dissolves and can damage the skimmer basket and housing.
Spacare Crystal Clear(Clarifier) 1Lt
SKU: LC-CC1Dosage:
Add 100ml per 1000 litres of water every fortnight.
Directions:
Ensure that your spa/hot tub water is correctly balanced.
Clean the filter(s) prior to using Spa Care Instant Filter Klenz for cartridge filters.
Add the required amount of Crystal Clear to the spa/hot tub (see dose rate above).
Run the circulation pump for a minimum of 1 hour.
Repeat the dosage on a fortnightly basis and when refilling the hot tub/spa.
NOTE:
When there is a heavy bather load, an extra dose is advised as there will be additional body fats in the water which could cause cloudiness and foaming.
