Directions:
Cut pipe square and deburr. Clean and dry jointing surfaces.
Check dry fit. Fitting should go over end of pipe easily but become tight about 1/3 to 2/3 of the way in.
Use a suitable applicator at least 1/2 the size of the pipe diameter.
Apply Weld-On Primer if required.
Apply a full, even layer of cement on the pipe equal to the depth of the socket. Coat the fitting socket.
Assemble while cement is wet. To avoid pushout, hold for about 30 seconds. Wipe off excess.
Allow 5 mins for good handling strength and 30 mins cure time.