Pool Chemicals – Page 9

Sensapool 3kg pH Reducer(Dry Acid)

SKU: CH-DA03K

Dosage:
150g per 10,000 Litres.

Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface

*Dosage rates and application only a guide

Sensapool 4kg Alkalinity Increaser(pH Buffer)

SKU: CH-BU04K

Dosage:
200g per 10,000 Litres.
Will increase Alkalinity 10PPM

Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface

*Dosage rates and application only a guide

Sensapool 4kg Calcium Increaser(Hardness Increaser)

SKU: CH-CI04K

Dosage:
100g per 10,000 Litres.
Will increase Calcium Hardness 10PPM (mg/L)

Application:
Dissolve the required amount in a bucket of pool water, stirring well. Dispense the solution gradually into the pool, away from the skimmer box. For optimal results, apply the required amount in thirds, while running the filtration system for up to six hours.

*Dosage rates and application only a guide

Sensapool 4kg Granular Pool Chlorine 70%

SKU: CH-GC04K

Dosage:
40g per 10,000 Litres.
Daily dosage rate for stabilised pools.

Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface

*Dosage rates and application only a guide

Sensapool 5kg pH Reducer(Dry Acid)

SKU: CH-DA05K

Dosage:
150g per 10,000 Litres.

Application:
Dissolve required amount of product in a bucket of pool water and evenly distribute across the pool surface

*Dosage rates and application only a guide

Spacare Therapy 3 for Spas

SKU: LC-65TH500M

Directions for use:
Check the water balance is within range
Pour around the perimeter of the spa with the pump running
Run the pump for one cycle
Dosage rate:
50ml for every 1000L of water
Frequency:
Weekly

Spacraft 125g Cartridge Filter Cleaner

SKU: CH-CFC125

Dosage:
125g per 25 Litres.

Application:
Submerge the cartridge in to diluted solution. (Allow to soak for 24hrs for best results)
Rinse thoroughly before refitting cartridge.

*Dosage rates and application only a guide

Spacraft 1kg Alkalinity & pH Increaser

SKU: CH-INC1

Dosage:
18g per 1000 Litres.

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Alkalinity & pH Decreaser

SKU: CH-RED500

Dosage:
Refer to table on bottle

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Alkalinity & pH Increaser

SKU: CH-INC500

Dosage:
18g per 1000 Litres.

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide

Spacraft 500g Cartridge Filter Cleaner

SKU: CH-CFC500

Dosage:
125g per 25 Litres.

Application:
Submerge the cartridge in to diluted solution. (Allow to soak for 24hrs for best results)
Rinse thoroughly before refitting cartridge.

*Dosage rates and application only a guide

Spacraft 500g pH Increaser

SKU: CH-PHUP500

Dosage:
Refer to table on bottle

Application:
Measure the correct quantity and mix in a bucket with spa water, distribute around spa and run filtration system for 1 hour.
Allow 3-4 hours before retesting levels.

*Dosage rates and application only a guide