No products in the cart.
24-48 Hr Dispatch
Fast Delivery Australia Wide
Part Identification
On Site Over the Phone Help
Trade Registration
Clearchem Hardness increaser 4kg
SKU: LC-CC.CI.4KApplication:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
Clearchem Hardness Increaser 8kg
SKU: LC-CC.CI.8KApplication:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
ClearChem pH Increaser(Soda Ash) 25kg *PICK UP ONLY*
SKU: LC-CC.PI.25KApplication:
Ideal pH is between 7.2 - 7.8
Broadcast over pool surface or mix in a bucket of water as per label instructions
Allow pump to run for 3hrs prior to re-testing
Dosage Rates per 10,000 Litres:
pH below 6.8 add 100grams
pH 6.8 - 7.0 add 80 grams
pH 7.0 - 7.2 add 40 grams
Clearchem Stabilised Chlorine 10kg
SKU: LC-CC.SC.10KApplication:
Dissolve granules in water prior to use and add directly to water
Dosage:
Initial start-up dose is 100 - 170gms per 10,000 litres
Then apply a daily dose of 25 - 30 gms per 10,000 litres
Dosage rate are only a guide
Clearchem Stabilised Chlorine Tablets 2kg
SKU: LC-CC.ST.2KApplication:
One tablet per 20,000Litres placed in a floating tablet dispenser
Dosage rates indicated are only a guide
Clearchem Sun Screen 2kg
SKU: LC-CC.SU.2KApplication:
May be added slowly via the skimmer box with the pump running
Run pump for a minimum of 8 hours
May be added directly to the pool.
Mix in a bucket of water first and then broadcast over entire pool surface
Pool may go cloudy for a short period but will clear within 8 hours
Cyanuric acid may take up to 24 - 36 hours to dissolve completely
Level of cyanuric acid should be tested every 6 - 8 weeks depending on rainfall
Dosage:
Add 100gm per 10,000 Litres to raise Cyanurate level by approximately 10ppm
Dosage rates indicated are only a guide
Lo-Chlor Anti Crystallite 1L
SKU: LC-60AC1LDosage:
Read directions on bottle for dosage rates and instructions.
Lo-Chlor Anti Crystallite contains a blend of potassium permanganate and other rare compounds. These metallic compounds can cause mild staining.
If staining occurs, an addition of Lo-Chlor Multi Stain Remover followed up by Lo-Chlor Metal Solution will remove such stains within minutes.
Do not overdose!
Read directions on bottle for dosage rates and instructions
Lo-Chlor Miraclear Pool Algaecide 1L (Metal free)
SKU: LC-50MA1LDosage:
Initial Dosage: Use 150ML product per 10,000 Litres.
Maintenance Dosage: Use 80ML product per 10,000 Litres every seven days.
Heavy Algae Growth/Winter Dose: Use 300ML per 10,000 Litres.
A few facts from the professionals...
Miraclear Algaecide does not contain any trace metals.It is therefore ideal for Ionised pools and Nature 2 pools and spas.
It is non foaming and non staining so is an ideal algaecide for fountains and ornamental ponds.
Unlike other non copper algaecides it does not contain Alkyl Dimethyl Benzyl Ammonium Chloride.
It is therefore ideal for salt pools and pools with high combined chlorine levels.
Lo-Chlor Solar Shield 1Lt
SKU: LC-60SS1LDosage rates:
250ML per 50,000 Litres pool water
Use once every 30 days
Directions for use:
Shake bottle before using.
With the pump running, add 250ML per 50,000Litres of water.
For best dispersion, add Solar Shield in front of pool return line or to skimmer.
Run the pump daily for proper circulation.
