LoChlor Starver Test Kit.

The kit comprises of liquid reagents to accurately tests for phosphate levels in swimming pools and spas.

Instructions on how to test phosphates accurately:

*Fill 12ML tube with approximately 10mls pool or spa water
* Add 5 drops Reagent A
* Add 5 drops Reagent B
* Shake well
* Compare colour against chart provided
 

Important Note

* Ensure all living algae and algae spores are killed before you test for phosphates.
* If algae are present the test result will read ZERO as the algae have consumed the phosphates.
* Before testing kill algae by either Superchlorinating or using a LoChlor Algaecide.
* Store kits in cool dry conditions
* Phosphate test kits have a 6 month shelf life
 

Important Tip

If the test result is positive and shows a result greater than 1ppm on the test chart you will need to carry out the following steps:

* Fill vial with approximately 2mls pool or
spa water
* Top up vial with approximately 8mls distilled / spring water
* Add reagents as per instructions
* Check results
* Multiply results by a factor of four (4x) to give accurate reading.
* If phosphate level is above 10ppm you should contact your LoChlor professional for further advice